Industrial Chemicals

SOIL WATER TRAP

Soil Water Trap, It is easy to use, superb water absorber (can absorb water up to 600 times its volume) soil additive. It is a polymer manufactured especially for frequently irrigated and high water consumption locations, gardens, glasshouses, and landscaping works. With this polymer which holds rain and irrigation waters in its body and absorb 600 times of its volume, the water is held before it drains off the soil and constitutes a natural and long term water tank base for plants and trees.

ISONEM SOIL WATER TRAP PROPERTIES

· It is mineral based and one component.
· 1 gr has the capacity to hold 600 times water.
· When water enters it expands and becomes a gel.
· It stays in the soil actively for approximately 4 years
· The water absorption speed is about an hour.
· It does not freeze until -60°C.
· Application depth is between 7 cm -1 m.
· It decomposes in the soil at a rate of - 15 per year.
· Once its job in the soil is done it returns to nature.

ISONEM SOIL WATER TRAP ADVANTAGES

· Increases the soil porosity and reduces soil incrustation
· Keeps the soil humid at all times.
· Reduces the evaporation of the water in the soil.
· It reforms the soil structure and prevents erosion
· Protects surface and underground waters from pollution.
· Provides plant growth in very hot and dry climates
· Reduces irrigation, worker, fertilizer and seed costs
· Provides %50-%70 savings in water consumption
· Prevents the damage caused by over fertilization
· Reduces fertilizer consumption by %50.
· Increases yield efficiency
· Improves plant quality
· Seasonal conditions are not required for forestation
· Prevents the death of sprigs and seeds under the soil during winter. (-60 C). Protects the environment.

Sapling planting, seedling production
Application on existing trees
Strawberry production, melon, watermelon, gourd applications
Field agriculture(Grains, beet, corn, cotton, sunower, potato, beans, etc.)
Grassland and landscaping applications
Floriculture
Pot floristry, clover, and feed plants applications
Mushroom production and a root dipping method

ISO-FIX

ISO-FIX WELDING PASTE is a strong adhesive paste that provides a quick solution for all kinds of repairs on wet or dry surfaces. It is effective in sealing cracks and holes, stopping leaks, repairing all kinds of superficial damage, and bonding similar and dissimilar components with each other. After application, the fully cured material can be drilled, sanded, and painted without primer. It provides superior adherence to materials such as metal, wood, marble, ceramic, glass, hard plastic, brick, concrete, etc.

Technical Specifications

Density A Comp. (25°C, g/mL) : Not applicable (N/A)
pH (25°C) : Not applicable(N/A)
Viscosity A Comp. (25°C, mPa.s) : Not applicable(N/A)
Solid Content (by weight %) : Not applicable (N/A)
Water Transmission Rate (kg/ m2. h0,5) : < 0,1 CLASS W3
Adhesion strength by tensile pull-out test (N/mm2) : 10,0 N/mm²
Water vapor permeability (m) : 5 ≤ SD ≤ 50 CLASS II
Touch Dry : 1 hour
Hard Dry: 2 hours
Mixture durability (23°C) : 30 - 40 minutes
Solvent: Organic solvent
Fire Class: C fl S1
Color: Blue

Used for repairing water, fuel tanks, and plumbing leaks repairing environments such as pools and aquariums, repairing solar energy systems, repairing all kinds of industrial and automotive sector repairs, filling holes and straightening bent surfaces, and many more.

Surface Preparation
The application surfaces must be free from all kinds of oil, dirt, dust, and surface residues and be completely dry and clean.

Preparation of the mixture: First, open the solvent-free adhesive (component A) box, and with the help of a knife, slice off as much material as needed. Then, the hardener (component B) is taken in the same proportion by weight and mixed thoroughly by kneading by hand. It is very important to mix the material at the specified mixing ratio. Gloves should be worn during the hand-mixing process.

Method of Application The prepared mixture is applied to the application area by sticking manually.

IMPORTANT
The surface should be protected from all external factors, such as rain, water, mechanical impacts, etc., for 24 hours during and after the application. Components A and B should be used within 30-40 minutes after mixing (23°C). At lower temperatures, the mixture's durability is extended, and at higher temperatures, the mixture's durability is shortened.

Packaging & Storage

Package: 40 gr set (A Component: 20gr , B Component:20 gr)

Storage temperature (°C) : 5 - 35 °C

Shelf life : The product is suitable for use for 24 months from the date of manufacture if stored in original, unopened, and undamaged packaging.

Storage conditions : Store in dry and cool places, away from heat and fire, with the package closures tightly sealed.

Health and Safety Information

For information and recommendations on the safe handling, storage, and disposal of chemical products, users should consult the latest Safety Data Sheet, which contains physical, ecological, toxicological, and other safety-related data.

ANTI-STAIN

It provides long-term cleaning and protection on all kinds of porous and absorbent surfaces on which it is applied, thanks to its high dirt-holding resistance. ISONEM ANTI-STAIN is water-based, one - component, and transparent. It does not spoil the appearance of the surface with its structure that does not form a film on the surface it is applied to. Dirt particles cannot adhere to the facade surface and the surface is easily cleaned of dirt with water, especially effortlessly with rainwater. It is applied indoors and outdoors in a short time, is not affected by UV rays, is economical and long-lasting. For ISONEM ANTI - STAIN, which can be applied to any painted or unpainted surface, vertical and horizontal, only the surface needs to be absorbent

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1,00 ± 0,10
pH (25°C): 8.0 – 11.0
Viscosity (25°C, mPa.s): 0 - 500
Solvent: Water
Color: Transparent
Product consumption: 50 – 100 mL/m² (one layer application)
Paintable (Coverage) Area: 10-20 m²/1 L plastic can, 50-100 m²/5 L plastic can, 100- 200 m²/10 L plastic can

It is applied to all kinds of absorbent surfaces such as plaster, concrete, gas concrete, screed and painted surfaces with an absorbent surface.

Surface preparation: If there are cracks or shield parts on the surface to be applied, they should be repaired, the area to be applied is oil, dirt, dust, etc. it should be cleaned of impurities. If the surface to be applied has been washed, it should be left to dry and the application should be made after the surface has dried. It is necessary that the surfaces to be applied must be absorbent, it is not suitable for non-absorbent surfaces.

Method of Application: ISONEM is thoroughly shaken and mixed in an ANTI-STAIN canister. Then, it is poured into a plastic bucket and fed thoroughly with the help of a brush to the prepared surface.

General Features

Fast Drying

B S1 do Fire Class

UV Resistance

CONCRETE

WALL, STONE

WALL (Painted/Unpainted)

WOOD, PAPER, CARTON

TILE, CERAMIC, PORCELAIN

PLASTER

STEEL, METAL

Application: Horizontal / Vertical

Surface Humidity: Dry surface

Application Tools: Roller, brush, spray

Primer Usage: X

Primer Consumption: X

Product Usage: 1 Layer

Product Consumption: 50 – 100 mL/m² (1 layer application)

Between Two Coats: 1 Hour

Touch Dry: 1 – 2 Hours

Hard Dry: 24 Hours

Note : Drying times are approximate data, it may vary depending on ambient conditions.

The information given in this technical data sheet has been prepared according to our knowledge, experiment results, and experiences. The correct and successful implementation of our products is completely beyond our control and responsibility. For this reason, our responsibility is limited to the quality of our product only, and this manual overrides all previous technical statements, descriptions and label information.

ANTI-FIRE SOLUTION

ISONEM ANTI FIRE SOLUTION, the non-flammable solution encapsulates the applied surface as molecules and prevents its contact with oxygen. Thanks to its active ingredients, it prevents it from reaching the temperature that will initiate the combustion reaction. In this way, the substance to which it is applied never catches fire. This product has been tested on a plywood wooden door. The 14mm thick plywood door with 1500 ° C heat applied to the front was exposed to direct flame for 40 minutes, at the end of this period it was found that the rear face only increased to 120°C. It has been observed that the wooden plywood door never catches fire.

ISONEM ANTI-FIRE non-flammability solution is a product that is produced from 100% natural materials, has no harm to human health, is 100% soluble in nature, and does not contain any prohibited materials. The smoke of a substance treated with a non-flammability solution contains 50% less carbon dioxide and carbon monoxide than the natural state of the same substance. In addition, it is 20-25% richer in terms of smoke and nitrogen. Therefore, while the surface is not flammable, the suffocating effect of its smoke has been reduced by half. It is water based, one component.

WHAT MAKES ISONEM ANTI FIRE NON-FIRE SOLUTION UNIQUE?
ISONEM ANTI-FIRE non-flammability solution is not a flame retardant, it provides a complete non-flammability. The flame retardant applied material (textile, wood, etc.) burns when it is exposed to the flame and goes out when the flame is cut off. In other words, the main thing is that the substance does not burn when it is removed from the flame source. This can slow the spread of a fire, but it will never prevent it. The substance applied with ISONEM ANTI-FIRE non-flammability solution does not catch fire.

According to TSE TEST AND INSPECTION REPORT:

- INSPECTION AND EXPERIMENTS ARE DONE ACCORDING TO TS EN ISO 1716: 2010/JANUARY 2011.

- According to TS EN ISO 1182 /02.02.2012 DATE/ 139913 NO., in the result of the inspection and experiments, approved to CLASS A1 according to the criteria EN 13501-1/JANUARY-1 CHART-1.

TEST RESULTS ACCORDING TO IZMIR INSTITUTE OF TECHNOLOGY BIOLOGY DEPARTMENT RESEARCH LABORATORY

THE MATERIAL RESPONSE APPLICATION: Paper - Sponge - Wood – Fabric – Cotton

RESULT: NO BURNING

CONCLUSION

No burning, glare, melting activity has been observed in the relevant materials except for growing dark, and as a result, it has been shown that this liquid can be used effectively against combustion events.

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1,10 ± 0,10

Boiling point: 98°C

Freezing point: -3°C

pH: ~ 3,74 acidic

Evaporation (60°/24 hours): 50%

Solvent: Water

Combustion/Odor/Foaming: None

ISONEM ANTI-FIRE SOLUTION USAGE AREAS and METHODS

For wood materials: It can be made by waiting in the pools, depending on the absorption (absorption) of the wood or by spraying on the wood. If it is compatible with the paste by testing on MDF and chipboard, it is used in its production at the first stage. If the method of holding is done in the pool, one day at most is sufficient. Half an hour is enough for chipboard and MDF. According to the hardness of the wood, it has an incombustibility absorption capacity.

For the paint industry: It is incompatible with the paint itself. Since the target paint is not burnt, the application method is as follows; Before painting or varnishing, sanding will be done and then ANTI-FIRE non-flammability liquid is applied immediately before painting and dried, it is absolutely necessary to dry. Painting is done after this process takes place.

For industry sector: Fabric, cotton, wool, sponge, etc. In absorbent materials, it is made non-flammable and non-flammable by wetting with ANTI-FIRE, squeezing and then drying.

ANTI MOLOTOF

THROWAWAY FIRE EXTINGUISHER, A high-grade product developed for extinguishing fires of classes A, B, and C (European Classes) on the purpose of faster, safer and more effectively than its beginning. The only thing the user needs to do is throwing our product into the fire. When ISONEM ANTI MOLOTOV, which is in a special plastic package, is thrown into the fire, the plastic container breaks and extinguishes the fire immediately. It is a liquid extinguishing agent and when thrown into the fire, it releases into the atmosphere. The heat of fire evaporates the extinguishing agent and a chemical reaction starts. By releasing a large amount of carbon dioxide, it chokes the fire, cuts its contact with oxygen and thus extinguishes the fire. In addition, the chemical reaction introduces a cooling agent. In addition, the chemical reaction introduces a cooling agent and this reduces the temperature of the burning material and thus other chemical foams step in and prevent the materials in the area from re-flaring.

FEATURES

Shelf life of 5 years, do not need any maintenance
No annual inspection or refilling
Easy operation; just THROW it, no difficulty, suitable for all ages
Very light (850 g).
Suitable for A, B, C type flames.
Portable, no need to approach the fire.
It is rescue & evacuation tool.
Does not release too much smoke and does not block the escape area.
It is environmentally friendly, does not contain toxic substances.
Fast discharging: 1-5 seconds
Easily thrown into the fire and breaks down itself to extinguish the fire.
Does not require cleaning after use, no maintenance required.

TECHNICAL SPECIFICATIONS

Content: Water based
Density (25°C, g/mL): 1.07 – 1.17
pH (25°C): 8.0 – 8.9
Solvent: Water
Extinguishing Capacity: 8 - 10 m² (Class A)

Ideal use areas are closed and open areas.
It can be used for any initial fires.
It is a fire extinguisher which is very suitable for ships, houses, schools, vehicles and military facilities, gas stations, factories.

Product categories

Social media

Contact

Created a website